Posted inFeatured
Posted inMarine machinery Drawing
Welding Practices in the Shipbuilding Industry
Multiple Passes: When plates of high thicknesses are welded (usually more than 5 to 6 mm),…
Posted inMarine machinery Drawing
Welding Methods And Weld Defects
Welding is one of the most widely used hot-work processes used in the shipbuilding industry. The development…
Posted inMarine steam engine
Babcock & Wilcox boiler.
One of the best known water-tube boilers on land in England and America is the…
Posted inMarine steam engine
Normand boiler.
The next most extensive experience has been obtained in the British Navy with the Normand…
Posted inMarine steam engine
The Thornycroft boiler
The Thornycroft boiler ('Speedy' type)Fig. 58, consists essentially of a central upper steam cylinder A,…
Posted inMarine steam engine
Comparison with locomotive type.
As regards the use of those varieties of water-tube boilers which give the greatest power…
Posted inMarine steam engine
Water-Tube Or Tubulous Boilers.
THE previously described boilers, having the water outside the tubes and contained in an outer…
Posted inMarine steam engine
Double-ended boilers.
Figs. 37 and 38 show a double- ended boiler. This is a common type for…
Posted inMarine steam engine
Arrangement And Efficiency Of Boilers – Water Tank Boilers.
Low-pressure boilers. The first boilers fitted to work marine engines were of the rectangular, or…
Posted inMarine steam engine
Quadruple expansion engines.
In many cases in the mercantile marine the stage expansion principle is carried still further,…